136 found, showing page 8 of 10
M18 FUEL 1/2 Mid-Torque Impact Wrench w/ Friction Ring Kit
The M18 FUEL 1/2" Mid-Torque Impact Wrench w/ Friction Ring Kit delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This MILWAUKEE 1/2" Impact Wrench is the most compact in its class, giving you access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers you full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The included two M18 REDLITHIUM 5.0 batteries fit all M18 tools, delivering more work per charge and more work over the life of the pack.
View Details
Call for Price
M18 FUEL 2-Tool Combo Kit: Hammer Drill/Impact
The M18 FUEL 1/2" Drill Driver is the Industry's Most Powerful Drill delivering Up to 60% More Power, is Up To 1.5" Shorter and is Up To 2X Faster Under Heavy Load. The POWERSTATE Brushless motor delivers 1,200 in-lbs of torque and 2,000 RPMs providing fast drilling through demanding applications. At 6.9" in length this is the most compact drill in its class giving better access into tight spaces and reducing fatigue. The REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating, or over-discharge. The REDLITHIUM XC5.0 Battery Pack delivers more work per charger and more work over the life of the pack than competitors. The all-metal ratcheting chuck is the best-in-class by providing increased bit grip strength and corrosion resistance.
INCLUDES:
(1) M18 FUEL 1/2" Hammer Drill/Driver (Tool Only) (2804-20)
(1) M18 FUEL 1/4" Hex Impact Driver (Tool Only) (2853-20)
(2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48-11-1850)
(1) M18 & M12 Multi-Voltage Charger (48-59-1812)
(1) Carrying Case
(1) Side Handle
(2) Belt Clip
(2) Bit Holder
- POWERSTATE Brushless Motor: Purposely built for the M18 FUEL 1/2" Hammer Drill to provide Up To 60% More Power than the competitive set
- REDLINK PLUS Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 System.
- REDLITHIUM XC5.0 Battery Pack: Delivers more work per charge and more work over the life of the pack than competitors
- Up To 60% More Power: 1,200 in-lbs of torque
- Only 6.9" in length for access into tight spaces and reduced fatigue
- LED on foot of tool for better lighting in dark spaces
- Compatible with all M18 batteries
View Details
Call for Price
M18 / M12 Vehicle Charger
Charge On The Go. The M18 & M12 Vehicle Charger allows users to charge battery packs on the go from the DC Outlet of any vehicle. The charger provides full system compatibility and accepts all M18 and M12 batteries. Featuring REDLINK Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack. As an added level of communication, the charger has protective electronics that automatically shut down the charger to prevent excessive discharge of the vehicle
battery.
- Vehicle Charging: Plugs into vehicle 12V or 24V DC Outlet
- Charges all M18 & M12 Batteries: Full system compatibility
- Protective Electronics: Automatically shuts down charger to prevent excessive discharge of vehicle battery
View Details
Call for Price
EXTENSION ATTACHMENT 3' QUIK-LOK
EXTENSION ATTACHMENT 3' QUIK-LOK
View Details
$94.39
Vacuum Assisted Dust Extractor
The only universal tool of its kind on the market, the HAMMERVAC Vacuum Assisted Dust Extractor delivers a universal solution at low cost of ownership for dust extraction needs. The HAMMERVAC universal handle system allows quick set up and is compatible with with major brands of SDS Plus rotary hammers and AC/DC hammer drills so users can drill safely into concrete and masonry without purchasing a new drill. It features a universal vacuum attachment system that is compatible with standard hose sizes of wet dry vacuums. This allows a standard wet dry vacuum to provide power and suction needed to remove dust as holes are drilled. Includes (3) side handle clamping collar assemblies, a replacement nozzle, adjustable depth stop and ruler.
INCLUDES:
(1) Vacuum Assisted Dust Extractor (5261-DE)
(3) Side Handle Clamping Collar Assemblies
View Details
Call for Price
1-1/8" SDS Plus Rotary Hammer Kit
Get up to 85% Faster Drilling and 85% Harding Hitting while reducing Vibration to only 10.6 m/s2. With a powerful 8 amp motor, this rotary hammer delivers 0-1,500 RPM, 0-5,500 BPM and 3.6 ft-lbs of impact energy. This tool also has an all metal gear case and mechanical clutch to provide maximum durability. At only 12-1/2" inches long and 7-1/2 lbs, this tool makes for a very powerful and lightweight 1-1/8" 3-mode rotary hammer. The kit includes a side handle, depth rod and carrying case.
- Powerful 8-amp motor: Delivers 0-1,500 RPM, 0-5,500 BPM and 3.6ft-lbs of impact energy
- All Metal Gear Case: Provides Maximum Durability for Jobsite Conditions
- Minimized Vibration to 10.6 m/s
- Mechanical cluth: Protects the motor when the bit binds up
- Variable Position Chisel Stop: Allows material to be adjusted, regardless of orientation
- AVS Anti-Vibration System: Minimizes vibration for maximum comfort
What's Included
(1) 1-1/8" SDS Plus Rotary Hammer Kit (5268-21)
(1) Depth Rod
(1) Side Handle
(1) Carrying Case
View Details
Call for Price
1-9/16" Spline Rotary Hammer
Get optimal power for concrete drilling and chipping applications. The 1-9/16" Spline Rotary Hammer offers a heavy-duty 5.5 ft-lbs of impact energy, plus 450 RPM and 3,000 BPM for fast, solid performance, even when drilling in hard aggregate. Constant Power Technology (CPT) ensures consistent drilling power for the toughest applications handled by electrical, mechanical, plumbing, HVAC and general construction contractors.
A 12-position chipping adjustment lets you maintain the ideal hammer position while chipping in any orientation. A mechanical clutch protects the motor when the bit binds, and two-mode operation offers maximum versatility regardless of the application. The tool comes with a side handle and carrying case.
- Powerful 10.5 Amp Motor: Delivers 450 RPM and 3,000 BPM
- Powerful Hammer Mechanism: Delivers 5.5 ft-lbs (7.5J) of impact energy for drilling in hard aggregate
- CPT - Constant Power Technology: Delivers consistent performance in tough applications
- Mechanical Clutch: Protects the tool when the bit binds up
- 2-Mode Operation: Rotary hammer and hammer only for maximum versatility
- 12-Position Chipping Adjustment: Allows the user to maintain the desired hammer position while chipping in any orientation
View Details
Call for Price
1/2" Pistol Grip Dual Torque Hammer Drill with Case
The power to drill 1/2" holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5-amp, 1/2" Hammer Drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits.
The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill's lightweight, balanced pistol-grip design reduces fatigue during a long work day. The kit includes a durable carrying case.
- Powerful 7.5-amp dual-torque motor: Optimized for concrete fastening with overload protection. Choose trigger-speed control in two ranges: 0-1,350 RPM/0-22,000 BPM or 0-2,500 RPM/0-40,000 BPM
- 2-Mode operation: Drill-only mode for wood, steel and plastic; hammer and rotation setting easily sets concrete screw fasteners and drills small holes for anchors
- 2-Speed gear box: Select the correct drilling speed for the material and accessory
- Self-stopping brushes: Protects the motor and increases the life of the tool
What's Included
(1) 1/2 in. Pistol Grip Dual Torque Hammer Drill, 0-1350/0-2500 RPM (5378-20)
(1) Chuck Key
(1) Side Handle
View Details
Call for Price
1-3/4" SDS MAX Rotary Hammer
The Milwaukee 1-3/4" SDS Max Rotary Hammer has a powerful 15A Motor. This hammer delivers 8.1 ft-lbs of impact energy for the most demanding applications. The AUTOSTOP E-Clutch prevents over rotation of the tool in case of tool lock up. This feature gives the user enhanced control on the job. The variable speed dial allows the user to set the optimal speed per application. With two modes: Rotary Hammer and Hammer Only, the user can drill large holes or do any chipping applications. When chipping, there is a lock-on button that allows the user to chip without constantly pulling the trigger. Finally, with Advanced AVS (Anti-Vibration System), the user will feel much less vibration when using the tool.
- Powerful 14-amp 1,300 MWO Milwaukee motor: Provides best-in-class power and highest overload protection
- Two-speed impact mode: Use low (350 RPM/2,200 BPM) for light materials or high (450 RPM/2,840 BPM) for the toughest concrete
- Durable hammer mechanism: Provides 8.8 ft-lbs of torque for hard hitting performance
- CPT Constant Power Technology: Delivers consistent performance when the tool is under load
- Mechanical clutch: Protects the motor when the bit binds
- AVS Anti-Vibration System: Minimizes vibration for maximum comfort
What's Included
(1) 1-3/4" SDS Max Rotary Hammer (5426-21)
(1) Carrying Case
(1) Side Handle
View Details
Call for Price
1-3/4" Max HP BodyGrip Router Kit
Get the Upper Hand! with Milwaukee's BodyGrip Routers featuring the industry's first tactile handgrip designed into the base of the router, a fast, accurate linear depth adjustment system, a patented above-the-table depth adjustment mechanism, and a carrying case with integral RouterStation. Featuring a 1-3/4 max HP (11 Amp, 24,000 RPM) Milwaukee motor, these powerful and precise new routers give you the upper hand in all but the heaviest of cuts. The BodyGrip design is a comfortable over-molded rubber grip wrapped around the base with an adjustable hand strap that allows for left and right-handed operation, and two over-molded palm-grip side handles for superior comfort, maneuverability, and control. The exclusive linear depth adjustment features a large steel motor lock lever and depth adjustment gearing via a durable threaded screw integral to the motor itself. Both coarse and microfine adjustments are fast and accurate. The router sub-base includes a special access hole for a common 3/8 in. hex extension wrench for above-the-table depth adjustments, ideal for router table applications, and eliminating the nuisance of reaching beneath the table to set the cutter (or bit) height. This revolutionary system simplifies this once tedious process required with other designs and ensures that the switch and cord remain in the same optimal location. The kit version (5615-21) features an impact-resistant carrying case with heavy-duty metal hinges, comfortable free-swinging handle, and onboard wrench and collet storage. Also included is an integral RouterStation, a removable base that fastens quickly and securely to any work surface, providing convenient and reliable storage for the router and accessories. This patented design eliminates the need to change the depth setting or remove the bit altogether before storing the router.
INCLUDES:
(1) 1-3/4 Max HP BodyGrip Router (5615-20)
(2) 1 1/8" Collet Wrenches
(1) 1/2" Collet
(1) 1/4" Collet
(1) Carrying Case
- Exclusive BodyGrip Design
- 1-3/4 Max HP, 11 Amp, 24,000 RPM Milwaukee Motor
- Exclusive Linear Depth Adjustment System
- 1/4" and 1/2" premium self-releasing collets
View Details
Call for Price
1-3/4" Max HP Multi-Base Router Kit
The award winning line of Milwaukee Routers is growing! A new Heavy Duty Plunge Base introduced in June 2007 now complements Milwaukee's award winning BodyGrip Fixed Base in two new Multi-Base Router Kits, the 1-3/4 Max HP, 5615-24 and 2-1/4 Max HP EVS, 5616-24.
Both Multi-Base kits deliver everything offered by the Milwaukee BodyGrip Fixed Base Router with its multitude of patented innovations. The additional new Heavy Duty Plunge Base offers unprecedented design and features that professional users are seeking.
- Premium plunge system with exclusive four-point PM bushing design and constant spring tension to deliver smooth, non-binding plunge action throughout the entire plunge range (2-7/8 in.)
- Patented BodyGrip design with precise macro/micro linear depth adjustment system and patented above the table height adjustment
- Precise macro/micro depth adjustment system to 1/64 in. increment, 3 in. metal depth scale, adjustable pointer, and 6-position (1/8 in. increment) adjustable metal turret stops for precise, multiple-pass routing
View Details
Call for Price
1/4-Sheet Palm Sander
Milwaukee's 1/4-Sheet Palm Sander produces a fine, swirl-free finish. The 3.0 amp permanent magnet motor with 14,000 OPM produces dependable speed and power. The sander is designed for comfort with a tactile rubber top and body grip surface and a narrow sander body. Large paper clamp tabs allow for effortless paper changes.
- 3.0 Amp Permanent Magnet Motor with 14,000 Orbits Per Minute- Powerful, light weight motor produces dependable speed and power
- Pad Cushioning and Break- Reduces swirl marks and ensures a smoother finish
- Tactile Rubber Top and Body Grip Surface and Narrow Sander Body- Ergonomic design provides added comfort and control and reduces user fatigue from any angle
- Large Paper Clamp Tabs -Allows for effortless paper changes
- Integrated Vacuum Ports -Fits 1-1/4" or 2-1/4" hoses for efficient dust removal
- In-Line Dust Port with Flexible Dust Collection Bag- Captures maximum amount of dust without compromising site line
- Removable Top- Allows for easy service and brush replacement
View Details
Call for Price
5" Random Orbit Palm Sander
The Milwaukee 5" Random Orbit Sander features variable speeds of 7,000-12,000 OPM, so you can match the speed to the application. Its 3 amp permanent magnet motor produces constant speed and power. Use this sander to achieve a fine, swirl-free finish on anything on which you're working. For maximum compatibility the universal hose adapter allows for connections from all vacuum hose sizes. The plastic dust canister with filter provides efficient dust collection and increased durability.
- 3.0 Amp Permanent Magnet Motor: Delivers constant speed and power under load
- Variable Speed Dial: Adjustable sanding speed, provides maximum control and a smooth finish
- Universal Vacuum Hose Adaptor: Easily connects to all vacuum hoses sizes (1-1/4", 1-7/16", 1-1/2", 1-7/8", 1-15/16", 2-1/2")
- Electronic Soft Start: Controls start up speed, to eliminate swirls marks - Dual Counter Balance: Provides lower vibration during use.
- Plastic Dust Canister with Filter: Durable plastic cansiter, provides efficient dust collection
- Universal hook and loop, and PSA PAD systems that accept both types of 5 in. sanding discs
View Details
Call for Price
15 Amp 7"/9" Large Angle Grinder w/ Lock-on
The 6088-30 7"/9" 15.0 Amp Large Angle Grinder w/Lock-on delivers performance and durability for the most difficult grinding jobs. The 15 Amp, 4.2 HP motor provides high overload protection and power for the toughest jobs. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool. Both a 7" and 9" Type 27 grinding guard are included for greater productivity.
- 15.0 Amp, 4.2 HP Motor -high overload protection and power for difficult applications
- 6,000 RPM- optimal wheel speed for material removal
- Debris Baffles- protect internal components by deflecting damaging debris out of the airflow at the intake vents
- External Brush Doors- reduces service time by providing easy access to brushes
- Soft-Grip Main Handle-provides better control and comfort
- Tool Free, Burst Resistant Guard-quickly adjust the guard without a tool
- 7" & 9" Type 27 Guard Included-for added productivity
- Compatible with multiple Grinder Guards and Flanges. See cross-reference guide below.
View Details
Call for Price
11 Amp 4-1/2" Small Angle Grinder with Slide Lock-On Switch
The 11 Amp 4-1/2" Small Angle Grinder (Paddle, No-Lock) delivers up to 3X more durability and up to 50% more power than the competition. With a 1,400 MWO motor that powers through the toughest jobs, the 6146-31 is the perfect match for industrial users. Milwaukee's Electronic Advantage includes Overload Protection to maximize motor life, an Electronic Clutch that extends tool life and helps prevent bind-up, Line Lock-Out that prevents automatic start-up after power loss, and Soft Start. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
- Powerful 11 Amp, 11,000 RPM Motor: Provides maximum performance and durability
- Overload Protection: Maximizes motor life
- Electronic Clutch: Extends tool life and prevents bind-up
- Tool-Free Accessory Change: Easily change "All Accessories" without a wrench
- Tool-Free Adjustable Guard: Provides quick guard installations and adjustments
- Advanced Airflow System: Maximizes airflow and reduces debris ingress, improving motor life and performance
- Debris Baffles - protect internal components by deflecting damaging debris out of the airflow at the intake vents
- Compatible with multiple Grinder Guards and Flanges. See cross-reference guide below.
View Details
Call for Price
